How do I install Talks and Zooms Software?

Installation Notes for TALKS for Series 60 only

The installation of TALKS and ZOOMS can vary slightly between different handsets and versions of Nokia PC Suite. These instructions are meant as a general guide. You should refer to the documentation for your specific phone model and version of PC Suite for additional details. If this is the first time you are performing an installation it is recommended to have sighted assistance.

Before beginning: 

  • Ensure that the date and time are set correctly on your phone. You will also need to know where key1 and key 2 are on your phone, also known as the left soft key and right soft key.
  • Install Nokia PC on your computer. If your phone did not come with this software on a CD you can download it from www.nokiausa.com.
  • Download the TALKS installation files and unzip them. You can download the installation files from our website by selecting here.

 

Installation:

  • Establish a connection between your phone and your PC using Nokia PC Suite. You will have the option to connect by USB data cable or Bluetooth. If you are unfamiliar with how to establish a connection, please refer to the documentation for Nokia PC Suite. We recommend using the USB data cable.
  • Open Nokia PC Suite and select the Application Installer. In the drop-down box select the first file to install. (If you are installing on a second generation handset, you must install a TTS first. The TTS is the voice, such as Eloquence or RealSpeak. If you are installing on a third generation handset you may install the files in any order.) Select the button for Install. The computer will transfer the file to the phone handset and a prompt will say “Please finish the installation on the phone user interface.”
  • The phone will beep. The screen on the phone will read “Application is untrusted and may have problems. Install only if you trust provider.” Key 1 is yes, key 2 is no. When you press key 1 the phone will beep.
  • The next screen will read “Install [file name]?” Key 1 is yes, key 2 is no. When you press key 1 the phone will beep.
  • The next screen will display a list that reads: “Options: Install, View Certificate, View Details” You may use the center toggle switch to move up and down this list of three options. By default Install is highlighted and you may press key 1 for OK or key 2 for cancel. When you when you press key 1 the phone will beep.
  • If there is a memory card installed in your device, the next screen will display a list that reads: “Select Memory: Ph. Mem (xxxx kb), M. card (xxxx kb).” You may use the center toggle switch to move up and down this list of 2 options. By default “Ph. mem” is highlighted. Key 1 is OK, key 2 is cancel. When you press key 1 the phone will beep.
  • The next screen will display a progress bar as the application installs. The phone will beep upon completion.
  • Repeat steps 2 to 7 until you have the TALKS file and desire TTS file(s) installed. On second generation phones, the software will not speak until both the TALKS file and TTS files have been installed. On third generation phones, the software will be able to speak once the TALKS file is installed. There is an embedded Nokia TTS in the third generation software.